Cleaning and Maintenance Tips For The Bench Sander

Best Bench Sander

If you are planning to use the best bench sander to polish your deck, there are some basic and important maintenance tips that you should keep in mind. Continue reading the article below to find out everything you need to know that has to do with keeping your machine clean and running well.

Best Bench Sander Cleaning:

BUCKTOOL BD4801 Bench Belt Sander

Before you start using the sander, the first thing you need to do is wash it properly with the help of a cleaning liquid. If there is no cleaner available, you can make your own by mixing 2 tablespoons of ammonia with a gallon of water. Check with your particular sander to make sure this is appropriate.

The next step is to add the liquid from the container and the top part of the sander, after which you can rub it in a circular motion on the surface you want to polish. Once it is done, you can go ahead and polish the surface with a rag or by scraping off the excess dirt which is sticking to the surface.

Another important tip for you to remember is to make sure that the area where the sanding is going to be done is well ventilated. Otherwise, dust particles would not get removed efficiently as there are too many airless particles around. This is especially important if you’re dealing with a large project.

Also, you may need to turn the power off once the sanding is complete if there is a lot of dust present. You can turn on the power when all the dust has been removed. After sanding the surface with a bench sander, it is important to buff the entire surface with a soft buffing wheel that is available at any hardware store.

Best Bench Sander Maintenance:

To maintain the best bench sander, you should check its parts at least once a year. The reason why you need to check these parts is that there are chances that there may be rust or even rust formation on any part of the machine.

If you notice that the sander is getting chipped or damaged then you should stop what you’re doing and investigate what’s going on. It is important to check whether nothing is out of order so you don’t cause any permanent damage.

You should also ensure that the belt is changed regularly to avoid overloading the machine and therefore it should be replaced at regular intervals, depending on the specifications of your machine.

Another thing that you should do regularly is to clean the dust collector. Cleaning the dust collector is very important because there is a possibility that dust particles could collect in the collection.

Additional Sander Care and Upkeep:

Best Bench Sander

If dust collects on the sander then the next step would be to clear out the dust with a soft cloth. You should also check the brushes regularly so that there is no build-up of dust in the brushes. Doing this regularly will ensure that the equipment will last longer than expected.

When you do this regularly, you would find that you have fewer problems. If you have some type of mechanical problems with your sander then you could also try changing the brushes. Consult with a manual or your local technician if you’re not sure how to do this.

The brush needs to be changed regularly so that the dust is not stuck between any of the parts or the brush. The sander is also a mechanical machine and therefore when it has an electrical problem then it could lead to premature wear and tear. Although not everyone wants to do this, it’s necessary.

Another thing that you should do regularly is to lubricate the belts on your sander. The lubricant helps to ensure that the tool is not too sticky and will be available to use when you need it. Use a good quality type of material so your bench sander will last a long time.


These are fundamental maintenance tips that will help you maintain your best bench sander well. There are many other tips which are useful in maintaining your sander but these are some of the basics that most of us tend to overlook.

Keep in mind that your particular piece of equipment may require specialized handling. Although there are standards, not every tool is the same.

If you’re looking for the best bench sander, it’s important to realize that it depends on your particular needs and the projects you want to take on. For example, professional projects require more expensive equipment than home ones. Check online and see what’s best for you.

5/5 - (46 votes)
Scroll to Top